Fixing Your Problem with Long-lasting Solutions

Radon emission is one of the major problems now a days. Lifetime radon mitigation is providing best solutions to its customers in Milwaukee to overcome this problem. We are providing Milwaukee Radon Mitigation solutions under the supervision of experts and be considering all the rules and regulations of the Environmental Protection Agency (EPA).

The mitigation process based on few methodologies; crawl space depressurization, block wall depressurization, drain tile depressurization and sub slab depressurization. Each methodology has its own specialties and is perfect in its own way.

Once a customer is willing to install the radon mitigation system, then firstly our inspection team inspect the place visually to understand the condition of place and to confirm that what kind of methodology will be suitable for the selected place. After is the radon mitigation assembly is installed. The installation process consists of mainly three steps; drilling, piping and fan installment.

Drilling

This is the fundamental course involved in mitigation process. This process involves the drilling in the basement to access the ground. Drilling is done with mechanical drill bits and this process takes time. After drilling the outer side of hole is covered with the glue type material so the there is no leakage of the radon outside the assembly.

Piping Assembly

After drilling the indoor piping assembly is installed. This assembly involves the pipes and elbows. They are joined with each other in such a way that there is no more additional damage to house. The assembly is installed at your desire place in the house and once the indoor assembly is installed, next step is the installation of the fan is the outdoor assembly. The pipe diameter depends on the inlet and outlet of the fan because of the pipe diameter do not match with the fan inlet and outlet diameters them the assembly will not be efficient and there will be leak of the radon gas along the pipe assembly which will not be vital for the optimal working of the radon mitigation system.

Fan installation

The fan is installed just after the piping moved outside. Purpose of fan is to force the gas inside ground to move upward with pressure. The fan is selected depending on the required amount of the gas to be removed. Once the fan is installed the outer assembly (piping) is inserted after fan straight upward.

The whole process is completed within a week. Radon mitigation system is the one-time investment to ensure the long-term life span of the place. If the mitigator system is not installed it can be eventually dangerous to human and to place itself.

During the installation of the assembly, the most substantial thing is to overcome any kind of opening or cracks within the assembly because if there are openings and cracks then there are chances that the assembly working efficiency is reduced.

After installation of radon mitigation assembly, occasionally testing of the system is done to overview the working of the system and overcome and kind of problems.